Levers and Knobs on Long Plates
9800 Series Levers on Narrow Long Plate
This stylish array of levers on long plates with rounded ends are non-handed to suit left or right-handed doors and offer smooth retraction of latch or lock at a 45 degree turn of handle. Choose from brass levers on alloy long plates or alloy levers on alloy long plates. Suitable for use with a 755 mortice lock ( external sets) or a tubular latch.
Product Range
Alloy Lever/Alloy Plate
Brass Lever/Alloy Plate
Product Information
Stylish array of levers on long plates (26mm wide by 221mm long with rounded end).
Leversets are non-handed to suit left or right-handed doors and offer smooth retraction of latch or lock at a 45 degree turn of handle.
Exterior sets ‘E’ with cylinder hole are for use with 755 Series Mortice Locks (60mm, 50mm, 40mm, 30 and 25mm backsets). Spindle hole to key hole measures 85mm which suits the 755 Series.
Exterior sets require a 23mm diameter spindle hole, two 9.5mm dimater holes top and bottom (195mm centre to centre) and cylinder hole/cut-out through door face.
Passage sets ‘P’ without cylinder hole are for use with 480 or 980/960 Series tubular latches. Passage sets suit a 35mm diameter spindle hole through the door face and two 9.5mm diameter holes top and bottom (195mm centre to centre).
The 9800 Series is not suitable for use with 2000 or 3000 Series Mortice Locks.
Choose from brass levers on alloy long plates or alloy levers on alloy long plates, as shown.
When ordering, add relevant finish code to form complete catalogue number, as shown under products illustrated.
Catalogue number refers to a complete set of 2 assemblies.
Guarantees
5 year limited tarnish resistant and 10 year limited mechanical
Gainsborough Hardware Industries Limited guarantees to repair or replace this product if within five (5) years from the proven date of purchase it tarnishes, discolours or corrodes; or if within ten (10) years from the proven date of purchase any mechanical defects occur. Applies only when properly installed and subjected to no more than fair wear and tear. This guarantee does not extend to labour costs, personal loss, death or injury, or economic, consequential or property damage of any kind whatsoever.